Installation Guide
What's Included:
- TCL Remote Control Unit
- 2 x AAA Batteries
- User Manual
- Warranty Card
Step-by-Step Setup
- Battery Installation: Open the battery compartment on the back of the remote and insert 2 AAA batteries with correct polarity.
- Power On: Ensure your TCL air conditioner is plugged in and powered on at the main unit.
- Pairing: Point the remote directly at the air conditioner's infrared receiver (usually located on the front panel).
- Initial Setup: Press the power button to test connectivity. The air conditioner should beep or display a response.
- Function Test: Test basic functions like temperature adjustment, fan speed, and mode selection to ensure all buttons work properly.
- Remote Placement: Place the remote in a convenient location, avoiding direct sunlight or heat sources.
Specifications
| Model Series | TRC-Universal-2024 |
| Type | Infrared Remote Control |
| Color | White / Black |
| Compatibility | TCL Split & Window AC Units (2018-2024) |
| Operating Range | Up to 8 meters |
| Display Type | LCD with Backlight |
| Battery Type | 2 x AAA (1.5V) |
| Battery Life | Approximately 12 months |
| Operating Temperature | -10°C to 50°C |
| Dimensions (HxWxD) | 12.5 x 4.5 x 2 cm |
| Weight | 85 grams (with batteries) |
Warranty Information
- Full Warranty: 1 year parts and labor
- Battery Warranty: 6 months on included batteries
- Additional Coverage: Optional extended warranty available
For warranty service, contact TCL Customer Service at 1-800-554-5566 or visit TCL.com
Key Features
Smart Temperature Control
Maintains your desired room temperature with precision, automatically adjusting cooling/heating output for optimal comfort and energy efficiency.
Multi-Mode Operation
Switch between Cool, Heat, Fan, Dry, and Auto modes with a single button press for complete climate control flexibility.
Turbo Function
Quick cooling/heating feature that operates the unit at maximum capacity for rapid temperature adjustment when needed.
Sleep Mode
Automatically adjusts temperature and fan speed throughout the night for comfortable sleeping conditions while saving energy.
Timer Functions
Set on/off timers up to 24 hours in advance for automated operation that fits your schedule and saves electricity.
Backlit Display
Easy-to-read LCD display with automatic backlight for clear visibility in dark conditions and current settings monitoring.
Button Functions Explained
Power Button
Turns the air conditioner on and off. Press once to start, press again to shut down.
Mode Selection
Cycles through Cool, Heat, Fan, Dry, and Auto modes for different climate needs.
Temperature Control
Up and down buttons to adjust temperature setting in 1°C increments (16°C-30°C).
Fan Speed
Controls fan velocity with Auto, Low, Medium, High, and Turbo speed options.
Swing Function
Activates automatic vertical and horizontal air swing for even room temperature distribution.
Timer Settings
Programs automatic on/off times for energy-efficient operation according to your schedule.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not working | Dead batteries, blocked signal, wrong angle | Replace batteries, ensure clear line of sight, point directly at AC unit |
| Buttons not responding | Battery corrosion, damaged buttons, remote damage | Clean battery contacts, check for physical damage, consider replacement |
| Display dim or blank | Low batteries, display failure, backlight issue | Replace batteries, check in bright light, test backlight function |
| Intermittent operation | Weak batteries, distance too far, interference | Replace batteries, move closer to AC, remove potential signal blockers |
| AC not responding to commands | Remote not paired, AC unit issue, signal interference | Repair remote, check AC unit power, eliminate interference sources |
| Rapid battery drain | Old batteries, button stuck, circuit issue | Use quality batteries, check for stuck buttons, inspect remote |
Error Codes Displayed
- E1: Room temperature sensor error - Check sensor connection
- E2: Evaporator temperature sensor error - Contact service
- E3: Communication error - Check remote signal and pairing
- E4: System pressure error - System maintenance required
- E5: Compressor error - Professional service needed
- E6: Fan motor error - Check fan operation and connections
Manual Downloads
Current Model Manuals
TRC-Universal-2024
Universal AC Remote Control
TRC-Smart-2024
Wi-Fi Enabled Smart Remote
TRC-Pro-2024
Professional Series Remote
TRC-Basic-2024
Essential Function Remote
Popular Previous Models
TRC-Universal-2023
2023 Universal Remote
TRC-Smart-2022
2022 Smart Remote
TRC-Pro-2021
2021 Professional Remote
TRC-Basic-2020
2020 Basic Remote